Why choose copper for custom badge accessories butterfly hats?

Butterfly hats are commonly used accessories in custom badges, and are generally used in conjunction with thorns. Generally speaking, the better quality butterfly hats are copper and brass, and the wings on both sides of the butterfly hat are very elastic. The wings on both sides of the butterfly cap are the key to removing the spikes. If they are too loose, they cannot be clamped, and if they are too tight, they will not be easy to remove. Do not scratch around the butterfly hat, and do not penetrate the top. Butterfly caps are generally not plated. The reason for not plated is that the wings on both sides will become hard and the product will lose elasticity.


Of course, if it is to be processed, gold-plated or nickel-plated can be used, but the elasticity will be lacking. The copper thickness of the commonly used butterfly cap is currently divided into 0.2mm/0.25mm/0.3mm; the thickness of the iron butterfly cap is 0.25mm.

0.3mm is the commonly used butterfly cap in the industry. The top of the 0.3mm butterfly cap is not easy to penetrate, but with 0.2mm, it can be penetrated with a light touch, and the texture is very light. 0.25mm is better than 0.2mm, but it will also penetrate. Some manufacturers will use the thinned butterfly cap because the price is low, and changing the thickness can reduce the cost, but the quality is reduced.



The thickness of the iron butterfly cap is 0.25mm, which is hard enough, and there is no problem of penetration. However, because the iron is relatively hard, it is not easy to use, and the iron butterfly cap needs to be electroplated. Because it is hard enough, the plating should not be too thick. Too thick plating will make the wings on both sides of the butterfly cap inflexible. Another problem is that the iron butterfly cap will rust.